Cisco vs Huawei Commands
Table of Contents
Table 1:
Exec mode
Cisco exec mode | Huawei user view |
---|---|
traceroute | tracert |
terminal length 0 | screen-length 0 temporary |
show | display |
show version | display version |
show history-command | display history-command |
show interfaces | display interface |
show ip interface | display ip interface |
show ip route | display ip routing-table |
show ip bgp | display bgp routing-table |
show clock | display clock |
show flash | dir flash: |
show logging | display logbuffer |
show snmp | display snmp-agent statistics |
show users | display users |
show tech-support | display diagnostic-information |
write terminal, show running-config | display current-configuration |
more nvram:startup-config, show startup-config | display saved-configuration |
write erase | reset saved-configuration |
write memory, copy running-config startup-config | save |
clear | reset |
clear counters | reset counters interface |
clear interface | reset counters interface |
clear access-list counters | reset acl counter all |
no | undo |
debug / no debug | debugging / undo debugging |
reload | reboot |
enable | super |
disable | super 0 |
erase | delete |
exit | quit |
configure terminal | system-view |
Table 2:
Configuration mode
Cisco configuration mode | Huawei system view |
---|---|
end | return |
snmp-server | snmp-agent |
hostname | sysname |
router bgp | bgp |
router ospf | ospf |
router rip | rip |
shutdown / no shutdown | shutdown / undo shutdown |